Plant Pot Risers — Triangular Pot Feet in 3 Sizes | Fermo

Fermo plant pot risers use four separate triangular pot feet to lift planters above the surface beneath them. Each open-frame foot has a wide inner crossbar that supports the pot, two tapered side rails and a raised outer stop that remains outside the planter wall.

Because the four feet do not connect, you can position them evenly beneath different pot diameters. Together they create a low-profile gap for airflow and drainage while keeping the look lighter than a one-piece plant pot stand. Designed for indoor and outdoor planters.

Select 4 Pieces (1 Pot), 8 Pieces (2 Pots) or 12 Pieces (3 Pots). Every pack contains separate, identical Fermo feet in the same selected size and ASA color. One planter requires four feet.

Each foot is 3D printed in ASA and made to order. No assembly or hardware is required. Fine layer lines and small surface variations are normal characteristics of the 3D printing process. Custom sizes are available upon request; message us before ordering if you need a specific footprint or lift.

Size guide — dimensions of one individual foot

• Small: 1.57 × 0.98 × 0.47 in (40 × 24.9 × 12 mm); pot lift 0.31 in (8 mm)
• Standard: 2.36 × 1.47 × 0.71 in (60 × 37.4 × 18 mm); pot lift 0.47 in (12 mm)
• Large: 3.15 × 1.96 × 0.94 in (80 × 49.9 × 24 mm); pot lift 0.63 in (16 mm)

Measurements are listed as overall length × overall width × total height. Pot lift is the height of the support platform beneath the planter; total height includes the raised outer stop.

Important information

• The planter, plant and other photo props are not included.
• Place four feet evenly around a stable, flat pot base and verify that the planter is balanced before use.
• Keep drainage openings unobstructed and position the raised stop outside the pot wall.
• Size dimensions apply to one individual foot, not to the full arrangement beneath the pot.
• Custom sizes must be discussed before placing an order.